ich wollte die Firmware von meinem HmIP-RFUSB-TK mittels folgendem Befehl auf die aktuelle Version heben. Das klappt aber nicht.
Code: Alles auswählen
root@ccu2:~# java -jar /opt/occu-git/HMserver/opt/HmIP/hmip-copro-update.jar -p /dev/ttyUSB0 -f /root/hmip_coprocessor_update-2.8.6.eq3 -o
[INFO] SGTIN = 3014f5ac94000416fb5334f4
[INFO] Performing update with firmware file '/root/hmip_coprocessor_update-2.8.6.eq3' ...
[DEBUG] Start application ...
[DEBUG] Application 'HMIP_TRX_App' running
[DEBUG] Request application version ...
[DEBUG] Request application version ...
[INFO] Updating coprocessor from version 2.8.4 to version 2.8.6
[DEBUG] Start bootloader ...
[DEBUG] Bootloader running
[INFO] Entering bootloader ...
[DEBUG] Start bootloader ...
[DEBUG] Bootloader running
[DEBUG] Request bootloader version ...
[INFO] Bootloader version: 1.0.12
[DEBUG] Send update frames ...
[ERROR] No update performed.
[INFO] Exiting update tool.
Hat jemand eine Idee dazu oder einen Analyseansatz?
Noch einen Hinweis zu meinem Setup. Ich Betreibe die x86 Installation von quickmic auf einem alten Notebook. Das Notebook hat tatsächlich noch serielle Schnittstellen (COM, IR). Als diese im BIOS noch aktiv waren, kam auch im /var/log/messages folgende Meldung, während das Skript ausgeführt wurde:
Code: Alles auswählen
Nov 29 17:45:47 ccu2 kernel: [ 1734.784628] ttyS0: LSR safety check engaged!
Nov 29 17:45:47 ccu2 kernel: [ 1734.821327] ttyS0: LSR safety check engaged!
Folgende sollten alle aktiven seriellen Ports sein:
Code: Alles auswählen
root@ccu2:/opt# dmesg | grep tty
[ 0.000000] console [tty0] enabled
[ 14.296172] usb 2-1: cp210x converter now attached to ttyUSB0